Analog Touch Screen Controller (TSC-10 series)

Analog Touch Screen Controller

This product is discontinued. Please examine TSC-34,TSC-44 Series in the case of first-time purchase.

DMC's TSC-10 Series supports serial and USB (TSC-10/IC). TSC-10 Series keeps the command compatibility with FIT-10 Series on serial connection and supports many functions including maximum 9 point controller level calibration. Multiple touch screen operation is supported up to 2 controllers and can set the priority by setting the ID.

General Specifications
Please refer to the following PDF file for the specification of the TSC-10 series controller board.
Voltage DC 4.1V to 5.5V (Serial)
DC 4.4V to 5.25V (USB)
Operating Temp. -20°C to 85°C*(Serial)
0C to 70C*(USB)
Power Consumption 30mW (Standard) Storing Temp. -20°C to 85°C*
Format Asynchronous Serial
v1.1 Low Speed USB
Resolution 10bit (1024 x 1024)
Transfer Rate 9600bps Dimension 9 x 9 x 1.7mm
*No dew condensation.
TSC-10 Series
Part No. Description Dimension Spec.
TSC-10/IC Discontinued
Serial/USB
Touch Screen Controller IC
LEAD-FREE
QFP32pin
591KB
TSC-10/USB Discontinued
Upgraded model: TSC-10/USB-PI Series
- -
TSC-10/USB-PI Discontinued
USB Touch Screen Controller Board.
LEAD-FREE
40(W)x30(D)x5(H)mm
626KB
TSC-10/USB-PI-E Discontinued
USB Touch Screen Controller Board with EEPROM.
LEAD-FREE
40(W)x30(D)x5(H)(2(H))mm
EEPROM is mounted at backside.
TSC-10/USB-PI-B Discontinued
USB Touch Screen Controller Board.
USB B connector
LEAD-FREE
40(W)x30(D)x11(H)mm
TSC-10/USB-PI-B-E Discontinued
USB Touch Screen Controller Board with EEPROM.
USB B connector.
LEAD-FREE
40(W)x30(D)x11(H)(2(H))mm
EEPROM is mounted at backside.
TSC-10/RSA Discontinued
RS-232C Touch Screen Controller Board.
LEAD-FREE
40(W)x30(D)x8(H)mm
417KB
TSC-10/RSA-E Discontinued
RS-232C Touch Screen Controller Board with EEPROM.
LEAD-FREE
40(W)x30(D)x8(H)(2(H))mm
EEPROM is mounted at backside.
*About Discontinued
*About the substitute of the Controller Board
Part No.
TSC-10/DD
Mouse Emulation Software

Windows® 95/98/ME, NT4.0/2000/XP Mouse Emulation Software
for FIT-10/TSC-10 Series
(OS must support USB for USB connection.)

Windows XP Embedded/Windows CE/Mac/Linux For detail, please contact us.


*Windows is the registered trademarks of Microsoft Corporation.
Get Acrobat ReaderAdobe Acrobat® Reader is required
to view drawings and specifications on this page.
Specifications are subject to change without notice.
|  TOP  |   Products  |   Download  |   Technology  |   Contact DMC  |   About DMC  |
Copyright(c) 2004-2008 DMC Co., Ltd.All rights reserved.